Shop
This is where you can browse products in this store.
Know what you're looking for?
Filter Products
Showing 501–550 of 2241 results
-
C-Tec NCP-13 Anti-Bacterial Wipe Clean Pull Cord Accessory Pack
C-Tec- The cord has integral properties that can help prevent the spread of infections such as MRSA, E.coli, C.diff, and Norovirus
- The pack is easy to clean using a cloth and mild detergent
- It is compatible with a wide range of ceiling pull units from various manufacturers
-
C-Tec NCP-27 Adaptable Conduit Box
C-Tec- Product dimensions (mm): 101 x 38mm (3mm thick). Internal wiring depth: 33mm
- Construction & finish: White PVC. RAL9003 Blue White.
- Weight: 86g
- Notes: Supplied with 2 x K40 x 30mm fixing screws; Flammability rating: UL 94-5VA; Relevant standard: BSEN 60670-1
-
-
-
C-Tec QT412RXA Rechargeable IR/RF Transmitter, Push/Pull For Attack
C-Tec- Enables staff to remotely signal attack/emergency situations on compatible infrared call points, ceiling receivers, or radio receivers
- Can also be used to trigger standard and emergency calls on 800 Series call systems
- Includes a karabiner clip for attaching to staff uniforms and can be recharged using a single or ten-way charging unit
-
C-Tec QT412RXCA Rechargeable IR/RF Transmitter, Push For Call, Pull For Attack
C-Tec- Transmits calls up to 10 meters away via infrared or radio signals, depending on the receiving device
- Includes a karabiner clip for attaching to staff uniforms, and can be programmed to generate different call levels
- Can be recharged using a single-way or ten-way charging unit, and transmitters on Quantec systems can be programmed with a unique user ID
-
C-Tec QT424/1 Single Way Charger for QT412 Range Transmitters
C-Tec- Connects to a standard 13A mains socket
- Provides a typical 14-hour charging time for a full cycle
- A 10-way version (QT424/10) is also available for charging multiple transmitters
-
C-Tec QT424/10 Ten Way Charger for QT412 Range Transmitters
C-Tec- Can be wall or desk mounted to suit the transmitter storage and charging requirements
- Fully recharged transmitters can be left connected to the charger with no detrimental effect
- Indicators confirm when charging is complete
-
C-Tec QT616 Quantec Infrared/Radio Fall Sensor
C-Tec- Transmits up to 10m line-of-sight and has RF coverage dependent on the Quantec receiving device used
- Includes a Karabiner clip and lanyard for easy attachment
- Can be programmed to generate different call levels and include a unique user ID/name
-
C-Tec QT644 Floor Pressure Mat
C-Tec- The mat triggers a standard call on a Quantec or 800 Series Call System when foot pressure is detected
- It has a tough, durable grey PVC finish with a non-slip rubber base
- The mat connects easily to the 6.35mm remote socket on compatible Quantec and 800 Series call points
-
C-Tec Quantec Network Splitter
C-Tec- An essential wiring/installation aid for C-TEC's Quantec Addressable Call System
- Helps protect against open and short circuit faults and reduces the risk of volt drop
- Includes one input and one output connection for Quantec's 'Spine' wiring (typically 1.5-2.5mm T&E) and six fused 400mA ‘limb’ connections for the wiring of individual circuits containing Quantec's field devices (typically 4 core stranded security cable)
- At least one QT603 is required per Quantec system (the more you use, the easier it will be to program and fault-find)
- Install one QT603 per corridor junction (locate at the end of the corridor nearest to the Quantec Controller). If the corridor is longer than 50m, install the splitter in the centre of the corridor to reduce wiring runs
- Mounts on a standard 25mm UK double gang back box
- 'Power' and 'Fault' indicators
- Max. 60 addressable devices per QT603.
-
C-Tec Relay on a Plate 24v 5A (single gang)
C-Tec- A general purpose, double-pole, polarised 24V 5A relay designed for use in 24V fire alarm systems.
- Incorporates a high intensity LED which illuminates red when the relay is active.
- Can be connected to a suitable control panel relay output or a standard polarised fire alarm sounder circuit to operate door retaining magnets, rollershutter doors, etc.
- Can be mounted on 25mm flush or surface mount back boxes.
-
C-Tec Relay Output Card For CFP Fire Panel Range
C-Tec- Reset, Fault, Aux and Remote Relay
- Output Card for CFP Panels
-
In Stock
£6.44 – £8.67 This product has multiple variants. The options may be chosen on the product page -
-
C-Tec Stainless Steel Emergency Assistance Alarm Kit
C-Tec- Attractive brushed stainless steel components for a sleek and durable finish
- Simple operation: user pulls the ceiling cord to activate the alarm light and sounder
- Includes a call controller, overdoor light with sounder, reset point, and ceiling pull cord
-
C-TEC Surface Mounting No Break Fire Call Point
C-Tec- Cable termination: 5-2.5mm 2
- Maximum voltage: 30Vd.c
- Current rating: 2 Amps
- IP rating: IP24D
- Material: PC/ABS
- Weight: 160g
- Dimensions: 89x93x59mm
- Colour: Red
-
-
C-Tec XFP Addressable Fire Alarm Panel
C-Tec- 1 or 2 loop addressable fire alarm panel
- Apollo XP95 or Hochiki ESP protocols supported
- Economy 16 zone plastic or robust 32 zone metal versions
- Networkable upto 8 XFP panels of any variant
- Certified to latest EN54 standards by LPCB
In Stock
£397.11 – £677.53 This product has multiple variants. The options may be chosen on the product page -
-
C-Tec XFP Repeater Panel
C-TecKey Features
- 16 Zone requires - 2 x 12V 3.2Ah VRLA connected in series
- 32 Zone requires - 2 x 12V 7Ah VRLA connected in series
In Stock
£268.09 – £368.50 This product has multiple variants. The options may be chosen on the product page -
CableSafe Fire Clips For Trunking (Pack of 100)
Illumino Ignis- Fire cable clip designed specifically to fix cable within trunking
- Quick and easy fixing with fold over fastening tabs
- Fits 2-core 1.5mm Fire Performance Cable
- Supplied in packs of 100
-
Call Point Key Kit For Fire Alarm Engineers
Illumino Ignis- Boxed kit of most popular manual call point keys
- Includes a total of 45 keys
-
-
Carbon Dioxide Fire Extinguisher Sign
Safety SignsCarbon dioxide extinguisher sign to identify your fire extinguisher. All our fire equipment signs are designed to comply with the UKEC legislation.
In Stock
£1.68 – £2.24 This product has multiple variants. The options may be chosen on the product page -
Carbon Dioxide Switch & Indicator
Axio- Wall mounting
- Monitors CO2 over range 0 to 2,000 ppm
- 230Vac Power supply
- 230V 8A rated output relay
- 15 year calibration interval
- Intuitive Light Display
In Stock
£141.44 This product has multiple variants. The options may be chosen on the product page -
Casil FR Flame Retardant 12V SLA Fire Alarm Batteries
Casil- V0 flame retardant claasification
- Stable quality & high reliability
- 5 years design time (at 25 degree C)
In Stock
£9.00 – £100.41 This product has multiple variants. The options may be chosen on the product page -
CAST CA402 Programmable Heat Detector
C-Tec- A high quality programmable heat detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels.
- Can be programmed to operate as a Class A1R (rate of rise), Class A2 (64ºC fixed temperature) or Class B (76ºC fixed temperature) heat detector.
- Onboard short circuit loop isolator.
-
CAST CA414 Programmable Multi-Sensor Fire Detector
C-Tec- A high-quality programmable multi-sensor detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels.
- Onboard programmable heat & smoke sensors make it deal for detecting a wide range of fires whilst also reducing false alarms.
- Multiple sensitivity/sensor settings.
- Short circuit loop isolator.
-
CAST CA416 Optical Smoke Detector
C-Tec- A high-quality smoke detector for use with C-Tec's XFP & ZFP CAST protocol addressable fire panels.
- Smart algorithms help reduce false alarms.
- Onboard short circuit loop isolator.
-
CAST XFP 1 Loop Addressable Panel
C-Tec- Powerful 40V 450mA loop driver allows the connection of up to 255 CAST devices
- High-speed data transmission and two soft addressing options (automatic via the panel or manual via a handheld programmer)
- Suitable for small to medium-sized stand-alone applications and larger, more sophisticated installations
-
CCP-E-IS Conventional Manual Call Point
Hochiki- Supports Either Frangible Glass Element Or Non Frangible Plastic Element
- Terminals Can Accommodate Up to 2.5mm² Solid Conductor
- Approved EN54.12
- Rugged Design
- ICECx Certification
-
CCTV Systems Logbook
Docs Store- Complete log book for CCTV system.
- Logs essential details of your system.
-
Ceasefire 6 Litre Water Mist Extinguisher
Ceasefire- 6 litre water mist fire extinguisher
- 13A 75F fire rating
-
Ceasefire Mini Automatic Clean Agent Adaptive Suppression System
Ceasefire- The Mini requires no prompt to start firefighting.
- Easily fit into the spots that are most prone to fire.
- Causes no damage to your electronics.
- Maintenance-free.
Low Stock
£173.90 – £242.44 This product has multiple variants. The options may be chosen on the product page -
Ceilo 5W LED Emergecy Downlight (Maintained or Non-Maintained) – Self-Test or DALI Version
Channel Safety Systems- Recessed LED emergency downlight
- Long life LED technology
- Maintained or non-maintained operation
- Simple installation
- Self-test and DALI versions available
- Self-test verion facilitates auto monthly and annual self test function
- Meets BS EN 60598-2-22 and other relevant standards
Low Stock
£55.30 – £120.86 This product has multiple variants. The options may be chosen on the product page -
Chubb or Kidde Extinguisher Pins & Indicators, Individual or Packs of 25
Express Fire- Pins and ok indicators for Chubb or Kidde extinguishers.
- Sold individually or in packs of 25.
- Available in red, green, blue, orange, yellow, white or grey.
In Stock
£0.65 – £13.35 This product has multiple variants. The options may be chosen on the product page -
Cig-Arrete SD Evolution Cigarette Smoke Detector c/w Voice Alarm
Radal TechnologyThe CSA-GOV incorporates tobacco smoke detection and is designed to provide voice messages in any area of a facility to warn of illicit tobacco smoking, such as restrooms, washrooms in schools, hospitals and business across America
-
Cig-Arrete SD Evolution Cigarette Flame Detector c/w Voice Alarm
Radal TechnologyThe CSA-FOV incorporates Flame detection and is designed to provide voice messages in any area of a facility to warn of illicit tobacco smoking, such as restrooms, washrooms in schools, hospitals and business across America.
-
Cig-Arrete SD Evolution Combined Sounder Flasher Unit c/w Voice Alarm
Radal Technology- Combined sounder & flasher compatable with the SD Evolution range of cigarette smoke detection products
- Can operate in battery powered standalone mode or via a power supply
- Any voice warning can be programmed onto the integrate SD memory card
- Upto 100 messages can be programmed to play individually or in sequence
-
Cig-Arrete Infra-Red Remote Control
Radal TechnologyA handy remote control compatible with all Cig-Arrête wireless detectors and audio-visual devices. Allows quick and easy programming of devices on location.
-
Cig-Arrete 6V Power Supply For SD Evolution Products
Radal Technology- 6V power supply for use with the standard version of all hardwired SD Evolution products.
-
Cig-Arrete CSA-SGTG Cigarette Test Gas
Radal Technology- Provides a means of regularly testing your Cig-Arrête system, without the need to ask a member of staff to smoke a cigarette.
- Clean and hygienic.
-
Cig-Arrete Slave Cigarette Smoke Detector
Radal TechnologyCigarette smoke detection is a must for any publicly used building, pub, hotel or workplace and to comply with no-smoking legislation it is essential that you have preventative measures and a cigarette detection system in place. The Cig-Arrête Slave Cigarette Smoke Detector is for use within the Cig-Arrête Alarm System in conjunction with the Cig-Arrête Standard Cigarette Detection Controller.
-
Cig-Arrete Slave Flame Detector
Radal TechnologyThe Cig-Arrête Slave Flame Detector is used with the Cig-Arrête Master Flame or Smoke Detector to create a cigarette detection system.
-
Cig-Arrete Standard Cigarette Detection Controller
Radal TechnologyTo police your building it is wise to have a Cigarette Detection System installed to alert you to any unlawful smoking. The Cig-Arrête Standard Cigarette Detection Controller is the hub of the Cig-Arrête Alarm System.
-
Cig-Arrete Weatherproof Master Flame Detector with Voice Sounder
Radal Technology- Designed to detect flame lighting a cigarette with 120 degree field of view
- Fully self-contained, battery operated with Voice Sounder
- Operates from 4 x AA standard alkaline battery with full remote control.
- SmarkWave drive system provides clear voice message using Windows PC. (Up to 100 messages)
- Tough, aestheic, IP54 enclosure
- On board relay for connection to remote equipment (contacts rated at 1A 24v dc)
- May be remotely powered using an optional 6V power supply (part CSA-006)
-
Cig-Arrete Wireless Combined Flame & Smoke Detector c/w Voice Alarm
Radal TechnologyCig-Arrête combined flame and smoke detector with wireless technology. Detects both tobacco smoke and flames from lighters and matches.
-
Cig-Arrete Wireless Combined Sounder Flasher Unit c/w Voice Alarm
Radal TechnologyCombined Sounder Flasher with voice alarm function and ultra-bright LEDs. Ideal for remote use with Cig-Arrête Wireless smoke and flame detectors.
-
Cig-Arrete Wireless Flame Detector c/w Voice Alarm
Radal TechnologyWireless Flame Detector detects ignition from cigarette lighters and matches. Sounds a pre-progammable voice message on activation.